The reason why the all-electric injection molding machine is welcomed by the market is that it has the performance that the full hydraulic injection molding machine can not achieve. Directly driving not only improves efficiency, but also improves energy utilization rate. Its energy utilization rate can reach more than 95%, so it can save 25% -60% energy compared to full hydraulic injection molding machine. Stable injection performance: The dynamic technical parameters of the full hydraulic injection molding machine are affected by changes in the temperature of the hydraulic oil and are prone to fluctuations. In contrast, the dynamic technical parameters of the full electric injection molding machine are basically free of external factors. The mold forming parameters always conform to the actual molding conditions, so the injection performance is stable, and the accurate response of the precise injection molding parameters can only be truly reflected on the servo motor system. High efficiency: The application of servo motor improves the responsiveness of the system. Take Changfeiya full electric injection molding machine as an example, its molding time is only 1/3 of the full hydraulic injection molding machine, because each actuator of the electric injection molding machine is driven by an independent servo motor, which is not affected by the system, so it It can perform compound actions, for example, it can eject at the same time during the mold opening process, and it can simultaneously close the mold during the plasticizing process, which greatly improves the productivity. Water saving: As the all-electric injection molding machine does not use hydraulic oil, cooling water is required only at the feeding port. Therefore, compared with a hydraulic injection molding machine with a load-sensitive pump, the amount of cooling water can be reduced by 70%. Compared with hydraulic injection molding machines, cooling water can be reduced by 90%. Optimize the working environment: Because no hydraulic oil is used, the working environment can be kept clean, and the machine's noise can be more than 10dB lower than that of a full hydraulic injection molding machine. While optimizing the working environment, due to the cancellation of the hydraulic system, the area occupied by the injection molding machine is saved by 15 %. In short, with its advantages of high speed, high efficiency, and high precision, all-electric injection molding machines are more suitable for processing high value-added products such as electronics, electrical, electrical appliances, and especially for injection molding of small parts. Advantages of high-precision injection molding.

Compared with the full hydraulic injection molding machine, the all-electric injection molding machine has many advantages: save energy and reduce production costs. Since each action of the electric injection molding machine is controlled by the corresponding servo motor, when a certain production action is performed , Other control motors do not need to run, thus greatly saving power consumption. In general, the power consumption of all-electric injection molding machines is only 1 / 3-1 / 4 of that of full-hydraulic injection molding machines. In addition, the previous all-electric injection molding machines did not use hydraulic oil, eliminating the need to cool the working oil. Significantly reduces the use of cooling water, which can greatly reduce production costs for manufacturers. The high responsiveness and stability of production movement control. Because all the movements of the production process of the all-electric injection molding machine are driven by servo motors, the movement speed is fast, the precision is high, and the use of hydraulic oil does not make the various process parameters. It is not affected by changes in oil temperature, so it has high stability during production. The low-noise feature of the all-electric injection molding machine not only benefits workers, but also reduces investment and construction costs in the soundproof production workshop. To ensure the cleanliness and safety of the working environment, because the full electric injection molding machine does not use working oil, it will not appear in the environmental pollution caused by mechanical oil leakage, and can greatly reduce the possibility of fire.