All-electric injection molding machine is a processing injection molding machine whose all power is supplied by electricity. Thermoplastics can be injection molded and processed into various molds. It is a commonly used machine in the synthetic processing of chemical materials.

There are three main aspects in the evaluation of plastic headline products. The first is the appearance quality, including completeness, color, gloss, etc.; the second is the accuracy between the size and relative position; the third is the physical properties corresponding to the purpose. , Chemical properties, electrical properties, etc. These quality requirements are different depending on the use occasions of the products, and the required scales are also different. The defects of the product mainly lie in the design of the mold, the manufacturing accuracy and the degree of wear. But in fact, the technicians of plastic processing plants often suffer from the difficult situation of using technological means to compensate for the problems caused by mold defects without great results.

The adjustment of the process in the production process is a necessary way to improve the quality and output of products. Because the injection cycle itself is very short, if the process conditions are not well mastered, there will be an endless stream of waste products. When adjusting the process, it is best to change only one condition at a time and observe a few more times. If the pressure, temperature, and time are adjusted together, it is easy to cause confusion and misunderstanding. If there is a problem, I don't know the reason. The measures and means to adjust the process are various.

For example, there are more than a dozen possible solutions to solve the problem of product complaints. Only by choosing one or two main solutions to the crux of the problem can the problem be truly solved. In addition, attention should be paid to the dialectical relationship in the solution. For example, if the product has a depression, sometimes the material temperature must be increased, sometimes the material temperature must be lowered; sometimes the material quantity must be increased, and sometimes the material quantity must be reduced.

Injection molding machine (abbreviated as injection machine or injection molding machine) is the main molding equipment that uses plastic molding molds to make thermoplastic or thermosetting materials into various shapes of plastic products.

Injection molding is achieved through injection molding machines and molds.