Vertical injection molding machine

1. The injection device and the mold clamping device are on the same vertical centerline, and the mold is opened and closed in the up and down direction. Its floor space is only about half of that of a horizontal machine, so it is about twice as productive when converted into floor space.

2. Easy to realize insert molding. Because the surface of the mold faces upwards, it is easy to insert and position the insert. If the lower template is fixed and the upper template is movable, combined with a belt conveyor and a manipulator, fully automatic insert molding can be easily realized.

3. The weight of the mold is supported by the horizontal template to open and close up and down, and the phenomenon that the template cannot be opened and closed due to the gravity of the mold similar to the horizontal machine will not occur. It is conducive to maintaining the precision of machinery and molds for durability.

4. The cavity of each plastic part can be taken out by a simple manipulator, which is conducive to precision molding.

5. Generally, the surrounding mold clamping device is open, and it is easy to configure various automatic devices, which is suitable for the automatic molding of complex and delicate products.

6. The belt-drawing conveying device is easy to be installed in the middle of the mold, which is convenient for automatic molding production.

7. It is easy to ensure the resin fluidity in the mold and the consistency of the mold temperature distribution.

8. Equipped with rotating table, moving table and inclined table, etc., it is easy to realize insert molding and in-mold combination molding.

9. In the small batch trial production, the mold structure is simple, low cost, and easy to unload.

10. Having withstood the test of many earthquakes, the vertical machine has better seismic resistance than the horizontal machine due to its low center of gravity.

Horizontal injection molding machine

1. Even if the mainframe is low, there is no height limit for the plant.

Angle injection molding machine

2. When the product can fall automatically, automatic molding can be realized without using a manipulator.

3. Due to the low body, it is convenient to supply materials and easy to overhaul.

4. The mold needs to be installed by crane.

5. When multiple units are arranged side by side, the molded products can be easily collected and packaged by the conveyor belt.

The axis of the injection screw of the angle injection molding machine and the movement axis of the mold clamping mechanism are arranged perpendicular to each other, and its advantages and disadvantages are between the vertical and horizontal. Because the injection direction and the mold parting surface are on the same plane, the angle injection molding machine is suitable for molds with asymmetric geometry with side gates or products that do not allow gate marks in the molding center.

An injection molding machine that can inject two colors at a time can meet consumers' appearance requirements and make users more comfortable using the product.

Multi-station forming machine

The injection device and the mold clamping device have two or more working positions, and the injection device and the mold clamping device can also be arranged in various ways.

Electric injection molding machine

The all-electric injection molding machine can not only meet the needs of special purposes, but also has more advantages than ordinary injection molding machines.

Another advantage of the all-electric injection molding machine is that it can reduce noise, which not only benefits the workers, but also reduces the investment and construction costs in the soundproof production workshop